LOKAWAY DIGITAL LOCK AND KEY OVERRIDE SET UP pg 3Digital Lock newLOKAWAY DIGITAL LOCK AND KEY OVERRIDE SET UP pg 2

 

To open for the first time :

  • Check battery installation
  • Enter ( 1 2 3 4 5 6 7 8 # ) 
  • The handle can now be turned Clockwise to open the door.

To change the Manager code for the first time :

  • Enter **   = 2 beeps sound
  • Enter 888 and press #  = 2 beeps sound
  • Enter ( 1 2 3 4 5 6 7 8 # )   = 2 beeps sound
  • Enter new 3-8 digit code and press #   = 2 beeps sound
  • Enter new 3-8 digit code again and press #
  • If the new code is accepted the green light flashes, if the red light flashes, please repeat process.

To add another user code for the first time ( up to 5 new user codes ) :

  • Press **   = 2 beeps sound
  • Press 333 and press #   = 2 beeps sound
  • Input your “new Manager” code and press #
  • Choose  any one number from 1-5 and press #
  • Input new 3-9 digit code and press #  = 2 beeps
  • Input the same new 3-8 digit code again and press #
  • If the new additional user code is accepted the green light flashes, if the red light flashes,  please repeat process.

Deleting any additional user and their code :

  • Enter **  = 2 beeps
  • Press 666 and press #  = 2 beeps
  • Input your “new Manager” code and press #  =2 beeps
  • Input that user code ID number between (1-5) and press #
  • Press the ID number again (1-5) and press #
  • If the deletion succeeds the green light will flash on, if the red light flashes it means the deletion failed. 

Wrong code lock out time :

  • If the wrong code is input 4 times the lock will give a lockout time of 5 minutes. During this   period the yellow light will flash with no response from the key pad.

Low battery condition :

  • The system will check the battery power when you open the door. If the battery is low the red light will flash with warning. Please replace the battery ASAP when red light is showing.   Please see over page how to remove the key pad to see the position of the 9V battery.